本帖最后由 抹不掉的痛ゝ又 于 2015-12-27 17:15 编辑

相机极少情况下能打开，但基本都是打开就黑屏，什么都看不到，，前置摄像头可以使用没问题求解释这是什么问题啊

***附件停止解析***


具体代码如下：

Test name:
Camera interface test

Test description:
Tests that all data lines between camera sensor and CSI receiver are functional

Result:
MINOR

Result (detailed view):
Camera Model ID[2], Major Rev, Minor Rev, Manufacturer ID, Serial Number[10], Sent Frames, Received Packets[2], CRC Status[4], ECC Status[4], NVM checksum[2], NVM calculated checksum[2]
69 65 7 1 16 48 50 48 48 48 48 48 52 48 48 3 43 242 0 0 25 144 0 1 43 204 134 97 134 97

Data description:
Detailed result contains following information:
Camera Model ID (2 bytes, MSB first)
Camera major revision (1 byte)
Camera minor revision (1 byte)
Camera manufacturer ID (1 byte)
Camera serial number (10 ascii characters, if shorter filled with 0x00, by default string is NOT '\\0' terminated)
Number of sent image frames from camera (1 byte)
Number of received packets over CSI-2 data bus (2 bytes, MSB first)
CRC errors detected by the CSI-2 receiver (4 bytes, MSB first)
ECC errors detected by the CSI-2 receiver (4 bytes, MSB first)
Expected NVM checksum (2 bytes, MSB first)
Calculated NVM checksum (2 bytes, MSB first)

Method description:
Test verifies that correct amount of data has been passed from camera sensor to CSI receiver and checks all transfer errors from receiver