诺基亚1320修复成功
本帖最后由 大宇l 于 2015-8-2 13:19 编辑
支持任何情况的砖头修复,不出端口也可以修复,视频地址:***链接停止解析***
Windows Phone 8/8.1/10 Flashing Started
Loading Flash Files Please Wait...
[DEAD BOOT REPAIR via USB is SUPPORTED]
======================================================
Windows Phone 8/8.1/10 Lumia Flasher
======================================================
If the Phone is ALIVE
1. Power On the Phone and Connect it to the USB Port
If the Phone is DEAD
1. Connect Phone to the USB Port
2. Press and Hold the VOLUME DOWN and POWER Buttons
3. Wait until the Phone Vibrates Shortly...
4. Stop Pressing the Buttons...
If the Phone is DEAD BOOT
1. Connect Phone to the USB Port
2. Install Correct Drivers:
"Nokia Emergency Connectivity" Located at:
C:\AdvanceBox Turbo Flasher\Driver\NOKIA_X2_USB_DRIVERS\
======================================================
Recovery Handle Found! - (WinUSB)
Sending Factory Loader...
Loader Upload Done!
Executing Loader...
Start Loader Done!
Waiting for USB Cycle...
USB Cycle OK!
Device Factory Mode OK!
USB Reconfiguration Done...
eMMC Detected OK...
Extracting Partitions from FFU...
Looking for SBL1...
SBL1 OK
Looking for SBL2...
SBL2 OK
Looking for SBL3...
SBL3 OK
Looking for UEFI...
UEFI OK
Looking for RPM...
RPM OK
Looking for TZ...
TZ OK
Looking for WINSECAPP...
WINSECAPP OK
Extracting Partitions Done!
Start Writing eMMC Blocks at : 0x00000000
Start Writing eMMC Blocks at : 0x01000000
Start Writing eMMC Blocks at : 0x01200000
Start Writing eMMC Blocks at : 0x01400000
Start Writing eMMC Blocks at : 0x01600000
Start Writing eMMC Blocks at : 0x01A00000
Start Writing eMMC Blocks at : 0x01C00000
Start Writing eMMC Blocks at : 0x01E00000
eMMC Write OK!
Closing Partition...
Partition Close OK!
BOOT WRITE DONE!
Waiting for USB Cycle...
USB Cycle OK!
Rebooting Phone...
Nokia Phone Info Mode Initiated...
Please wait upto 15 Seconds for SW Reset
Version: 1.1.1.3
Product Code: 059V3K9
Module Code: 0205883
Continuing Previous Boot...
Please wait upto 30 Seconds for Boot Re-entry
Boot Flash Mode Successful...
Buffers Flushed OK...
Phone Info Query Start...
Blocks Returned: 0x07 Blocks
Block ID 0x01 : 00241000
Block ID 0x02 : 00240000
Block ID 0x03 : 00E90000
Block ID 0x05 : Nokia.MSM8230AB.P6145.2.0
Block ID 0x0D : 0001
Block ID 0x0F : 0301010100000101FF
Block ID 0x10 : 0100130000
Checking SD Card Size...
Card Size: 0x00000000
Checking Platform Security Status...
Platform Secure Boot Status: Active
Secure FFU EFUSE Status: Active
Debug Status: Active
RDC Status: Not Active
Authentication Status: Not Active
UEFI Secure Boot Status: Active
Checking Secure FFU Mode...
Secure FFU Mode :
Query Flash App Information...
Flash App Information: 02010F011C00
UEFI App: FLASH APP
Flash App Protocol Version: 1.15
Flash App Implementation Version: 1.28
Query ROOT KEY HASH...
ROOT_KEY_HASH: 98BECD6BD8BA16F28867306AE571DC79E50714EB1F856F30A96B6D18436FFAB2
Query PUBLIC ID...
PUBLIC_ID: 68C42B33A86BC70E6F79880E7042B38E0B4608C3
Query eMMC Info...
EMMC Manufacture ID: SAMSUNG
EMMC Product SN : D903C071
EMMC_SIZE: 8 Gigabytes
Query Battery Charge Status...
BATTERY CHARGE_STATUS: 39%
Sending Image Signatures...
Image Signatures Accepted!
Erasing Data Partition...
Data Partition Erased Successfully
Preparing Buffers for DATA LOOP...
Allocating System RAM OK!
Start Sending DATA BLOCKS...
Finished Sending all DATA BLOCKS!
Exiting FLASH Mode via REBOOT...
Exit FLASH Mode Successful!
Flashing Done!
Total Flashing Time : 00:03:24
Currently Not Supported for Windows Phone
***附件停止解析***
***附件停止解析***
***附件停止解析***
为防止不可控的内容风险,本站已关闭新用户注册,新贴的发表及评论;
你现在看到的内容只是互联网用户曾经发表的言论快照,仅用于老用户留存纪念,且仅与科技行业相关,全部内容不代表本站观点及立场;
本站重新开放前已针对包括用户隐私、版权保护、信息安全、国家政策在内的各种互联网法律法规要求,执行了隐患内容的自查、屏蔽和删除;
本站目前所属个人主体,未有任何盈利安排与计划,且与原WFUN.COM所属公司不存在任何关联关系;
如果本帖内容或者相关资源侵犯到您的合法权益,或者您认为存在问题,那么请您务必点此举报或投诉!